Bioart- THERMAL COATING FINE STICKER FOR CORK FOR PANELS AND ROLLERS- 20 KG BAG
  • Bioart- THERMAL COATING FINE STICKER FOR CORK FOR PANELS AND ROLLERS- 20 KG BAG

Bioart- THERMAL COATING FINE STICKER FOR CORK FOR PANELS AND ROLLERS- 20 KG BAG

€26.30

 Self-adhesive plaster based on natural hydraulic lime for fastening cork panels, super-compressed cork rolls with thicknesses of 3-6-10 mm.

Quantity
There are not enough products in stock

 Customer ratings and reviews
Nobody has posted a review yet
in this language

Bioart- FINE STICKER THERMAL COATING FOR THICKNESS CORE PANELS 3-6-10 MM BY 20 KG/SAC.

ADAPTED for cork of thin thickness: A layer of 2mm between the plug and the wall!
THERMAL AND ACOUSTIC INSULATION Contains powdered cork!
LIGHT AND EASY TO ASK: for its light weight SPECIFIC.
NATURAL: composed of selected aggregates, lime and cork.
HIGH STICKER DENSITY: 10 square meters per bag!
HIGH COATING DENSITY: up to 20 square meters per bag!

Natural adhesive smoothing for thermal insulation, Bioart adhesive / powder leveling Fine thermic made from natural hydraulic lime and cork powder suitable for bonding and finishing of sheets and rolls of cork thickness of 3-6 -10 mm.

With Bioart-adhesive / Thermal leveling finish get a "thermal" vapor barrier finish that gives a very beautiful appearance to see, soft to pet for its cork content.

COMPOSITION

Mineral product premixed natural hydraulic lime, cork, limestone aggregates sand, pozzolana, mineral aggregates and additives developed specific finish that improve its performance in terms of practicability and adhesion.

PREPARATION AND INSTALLATION

Mix Bioart Adhesive Leveling Thermo-fine 20 kg in clean water with an electric mixer until the paste is smooth and free of lumps. Allow the mixture to stand for 5 minutes before application.
The kneaded product can be used for about 90 minutes Do not add water and shake the dough for later use after this date.
Apply glue to the wall with a notched spatula (5x7mm tooth) and apply the cork sheet by gently pressing with a wooden or plastic float.

Once dry, apply Bioart-Adhesive / Thermo-fine pasture with a large spreader with vertical and horizontal passages. To get coplanarity desiderata.Applicare Spend the next POSSIBLE WHEN the hand before the mail still not completely dry.
Must be done has passed minimum and final thickness Constant:Using a sponge trowel to get a good finish coat.
With a stainless steel trowel with rounded edges to have a smooth area.
After successful maturation is produced appropriate It has reception colorful decorative stoppers made of lime or vegetable resin.

WARNINGS

Do not apply at temperatures below + 8 ° C, in strong winds, rain and direct sunlight.
Avoid application on frozen, dusty, unstable and incoherent.
Avoid applying gypsum-based substrates. Protect from frost and shave with applications made in cold, damp periods to wait for complete drying of the plaster before proceeding to the final decorations.
Bioart adhesive / leveling Thermofine is a product with natural color and is therefore sensitive to slight variations in color due to the advancement of sampling in the quarry of marly limestone from which you get natural hydraulic lime.
Temperatures below + 8 ° C with a high percentage of relative humidity can give rise to superficial carbonation phenomena. The effect of shade may vary depending on the environmental conditions of application


APPROXIMATE CONSUMPTION

Glue: 2 kg powder per m2.
Smoothing: 1-2 kg per m2 powder.

CONDITIONING

20kg bags on pallets to lose protected by stretch film.

CONSERVATION

12 months in its original packaging, intact and dry. 


TECHNICAL FEATURES

Appearance: Premixed powder
Color: brown beige
Powder of apparent density: ~ 1000 kg/mc
Maximum overall diameter ≤ 0.5 mm
Application temperature: from + 8 ° C to + 35 ° C
Lifetime: ≥ 90 minutes approx.
Vapor diffusion: 15 ≤ μ

ARTIMESTIERI
ISZ2-TF

Download

You might also like

 Reviews

Be the first to write your review !